Product ID:RECTOR RESIN R-77
MSDS Date:06/13/1986
FSC:8030
NIIN:00N029916
Kit Part:Y
MSDS Number: BPDGH

ALLIED PRODUCTS CORP

NEW HAVEN, CT 06505
US

Emergency Phone: 203-562-2171;800-424-9300(CHEMTREC)

Info Phone: 203-562-2171

Cage: ACMED

ALLIED PRODUCTS CORPORATION

1404 NEW HAVEN, CT 06505 US

Telephone: (203) 562-2171

Cage: ACMED

EPOXY RESIN

CAS: 25085-99-8

Fraction By Weight: 50-60%

PROPANE, 1-BUTOXY-2,3-EPOXY-;(BUTYL GLYCIDYL ETHER) (BGE).

CAS: 2426-08-6

RTECS: TX4200000

Fraction By Weight: 5-10%

OSHA PEL 50 PPM

ACGIH TLV: 25 PPM; 9293

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CAUSES IRRITATION TO SKIN. MAY CAUSE
SENSITIZATION OR ALLERGIC REACTION. CAUSES IRRITATION TO EYES, MAY
CAUSE DAMAGE TO EYE TISSUE. VAPORS ARE IRRITATING TO EYES AND
RESPIRATORY TRACT, MAY CAUSE HEADA CHE, DIZZINESS, NAUSEA,
VOMITING, NARCOSIS, OR UNCONSCIOUSNESS. IF HEATED, AS IN CURING
OVEN, MAY EVOLVE(EFTS OF OVEREXP
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:VAPORS WHICH ARE IRRITATING TO
RESPIRATORY TRACT AND SKIN WHICH MAY CAUSE SENSITIZATION OR
ALLERGIC REACTION OF RESPIRATORY TRACT OR SKIN. BGE HAS BEEN
REPORTED TO CAUSE MUTAGENIC EFFECTS (CH ANGES IN GENETIC SYSTEM) IN
LABORATORY ANIMALS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE:FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES & GET
MD IMMEDIATELY. SKIN:PROMPTLY WASH WITH MILD SOAP & WATER.
INHAL:MOVE TO FRESH AIR. IF BREATHING DIFFICULT, GIVE O2 & GET MD.
IF BREATHING STOPS, GIVE ARTIFICIAL RESPIRATION, PREFERABLY MOUTH
TO MOUTH, & GET MD IMMEDIATELY. INGEST:GIVE 2 GLASSES (8-16 OUNCES)
OF WATER TO DILUTE AND GET MD.

Flash Point Method:SCC
Flash Point:155F,68C (BGE)
Extinguishing Media:WATER SPRAY, CO2, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . USE WATER SPRAY TO COOL FIRE EXPOSED
CONTAINERS.
Unusual Fire/Explosion Hazard:PRODUCTS OF COMBUSTION AND DECOMPOSITION
MAY BE TOXIC.

Spill Release Procedures:COVER W/ABSORB SUCH AS SAND & COLLECT IN
CNTNRS FOR DISP. RESIDUAL RESIN MAY BE REMOVED USING STEAM OR HOT
SOAPY WATER. USE OF METHYLENE CHLORIDE OR OTHER SOLVS FOR CLEANUP
POSES DISTINCT HAZ & SHOULD BE AVOIDED. VENT AREA THORO & ELIM
ALL(SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN TIGHTLY CLOSED CONTAINERS IN
A COOL, DRY, WELL-VENTILATED AREA.
Other Precautions:FOLLOW MIX RATIO ON PROD DATA SHEET. THORO STIR BOTH
COMPONENTS BEFORE MIXING, & CONTINUE TO STIR FOR AT LEAST 15 MINS
AFTER MIXING TO ENSURE EVEN BLENDING. READ MSDS FOR BOTH COMPONENTS
BEFORE USING. MAY CAUSE IRRIT TO EYES/SKIN. (SUPDAT)

Respiratory Protection:IF NECESSARY, USE NIOSH/MSHA APPROVED RESPIRATOR
WITH CARTRIDGE FOR ORGANIC VAPORS OR SUPPLIED-AIR RESPIRATOR.
Ventilation:THOROUGH GENERAL MECHANICAL VENTILATION REQUIRED. LOCAL
EXHAUST RECOMMENDED. VENT CURING OVENS OUTSIDE THE WORK AREA.
Protective Gloves:RUBBER OR PLASTIC GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:LAB COAT OR COVERALLS TO PREVENT CONTACT
WITH SKIN OR CLOTHING. EYE WASH STATION AND SINK SHOULD BE READILY
ACCESSIBLE.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING & BEFORE EATING,
DRINKING, SMOKING OR USING TOILET. LAUNDER CONTAM CLTHG BEFORE
REUSE.
Supplemental Safety and Health
SPILL PROC:SOURCES OF IGNIT. PERSONNEL REMOVING SPILL SHOULD OBSERVE
ALL PRECS & USE APPROPRIATE PROT EQUIP. OTHER PREC:MAY CAUSE
ALLERGIC SKIN REACTION. MAY CAUSE LUNG IRRIT. MAY CAUSE ALLERG RESP
RX N. AVOID ALL CNTCT W/SKIN, EYES OR CLTHG. IF MATL HEATED, AVOID
BRTHG VAPS. HNDL I/A/W HAZ POTNTL OF CURING AGENT(S).

HCC:V4
Boiling Pt:B.P. Text:ING 2
Vapor Pres:ING 2
Vapor Density:4.5
Spec Gravity:1.2 (H2O=1)
Solubility in Water:PARTIAL
Appearance and Odor:DARK AMBER, VISCOUS LIQUID
Percent Volatiles by Volume:<0.5

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:STORAGE AT ELEVATED TEMPERATURES,
PREMATURE MIXING WITH EPOXY CURING AGENTS OR MIXING IN OTHER THAN
REC PROPORTIONS.
Hazardous Decomposition Products:CO, CO2, ALDEHYDES AND OTHER ORGANICS.

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH APPLICABLE FEDERAL,
STATE, AND LOCAL REGULATIONS. NOT A HAZARDOUS WASTE UNDER RCRA.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.